JOURNAL PUBLICATIONS

 

20. Philipp Maas, Yuta Mizumoto, Yasuhiro Kakinuma, and Sangkee Min, “Machinability Study of Single-Crystal Sapphire in a Ball- End Milling Process,” International Journal of Precision Engineering and Manufacturing, Vol. 18, No. 1, pp. 109-114, 2017.

19. Won-Shik Chu, Hugo Rodrigue, Doo-Man Chun, Young-Tae Cho, Seung Hwan Ko, Kyu-Jin Cho, Suk Won Cha, Sangkee Min, Sung Ho Jeong, Haedo Jeong, Choon-Man Lee, Chong Nam Chu, and Sung-Hoon Ahn, “From Design for Manufacturing (DFM) to Manufacturing for Design (MFD) via Hybrid Manufacturing and Smart Factory: A Review and Perspective of Paradigm Shift,” International Journal of Precision Engineering and Manufacturing-Green Technology, Vol. 3, No. 2, pp. 209-222, 2016.

18. Jang-Yeob Lee, Yong-Jun Shin, Min-Soo Kim, Eun-Seob Kim, Hae-Sung Yoon, Sung-Yong Kim, Yeo-Chan Yoon, Sung-Hoon Ahn and Sangkee Min, “A Simplified Machine-Tool Power-Consumption Measurement Procedure and Methodology for Estimating Total Energy Consumption,” Journal of Manufacturing Science and Engineering, Transactions of the ASME, Vol. 138, No. 5, pp. 051004-051004-9, 2015.

17. Behrendt, T., Zein, A., Min, S., “Development of an Energy Consumption Monitoring Procedure for Machine Tools,” Annals of the CIRP, Vol. 61, No. 1, 2012.

16. Inada, A., Min, S., Ohmori, H., “Micro Cutting of Ferrous Materials Using Diamond Tool under Ionized Coolant with Carbon Particles,” Annals of the CIRP, Vol. 60, No. 1, pp. 97-100, 2011.

15. Min, S., Lidde, J., Raue, N., Dornfeld D., “Acoustic Emission Based Tool Contact Detection for Ultra-precision Machining,” Annals of the CIRP, Vol. 60, No. 1, pp. 141-144, 2011.

14. Inada, A., Ohmori, H., Min, S., Dornfeld, D., “Investigation of the Effects of an Electrolytic Coolant with a Nano Carbon Additive in Diamond Micro Cutting on Ferrous Materials,” Journal of Advanced Mechanical Design, Systems, and Manufacturing, Vol. 4, No. 5, pp. 1076-1083, 2010.

13. Aurich, J.C., Dornfeld, D., Arrazola, P.J., Franke, V., Leitz, L., Min, S., “Burrs – Analysis, Control, and Removal,” Annals of the CIRP, Vol. 58, No. 2, 2009.

12. Min, S., Sangermann, H., Mertens, C., Dornfeld D., “A Study on Initial Contact Detection for Precision Micro-mold and Surface Generation of Vertical Side Walls in Micromachining,” Annals of the CIRP, Vol. 57, No. 1, pp. 109-112, 2008.

11. Childs, T.H.C., Sekiya, K., Tezuka, R., Yamane, Y., Dornfeld, D., Lee, D.E., Min, S., Wright, P.K., “Surface Finishes from Turning and Facing with Round Nosed Tools,” Annals of the CIRP, Vol. 57, No. 1, pp. 89-92, 2008.

10. Childs, T.H.C., Dornfeld, D., Lee, D.E., Min, S., Sekiya, K., Tezuka, R., Yamane, Y., “The Influence of Cutting Edge Sharpness on Surface Finish in Facing with Round Nosed Cutting Tools,” CIRP Journal of Manufacturing Science and Technology, Vol. 1, No. 2, pp. 70-75, 2008.

9. Dornfeld, D., Min, S., Takeuchi, Y., “Recent Advances in Mechanical Micromachining,” Annals of the CIRP, Vol. 55, No. 2, pp.745-768, 2006.

8. Min, S., Dornfeld, D., Inasaki, I., Ohmori, H., Lee, D., Deichmueller, M., Yasuda, T., Niwa, K., “Variation in Machinability of Single Crystal Materials in Micromachining,” Annals of the CIRP, Vol. 55, No. 1, pp. 103-106, 2006.

7. Min, S., Lee, D. E., de Grave, A., de Oliveira Valente, C. M., Lin, J., Dornfeld, D. A., “Surface and Edge Quality Variation in Precision Machining of Single Crystal and Polycrystalline Materials,” Proceeding of the Institution of mechanical Engineers, Part B: Journal of Engineering Manufacture, Vol. 220, No. 4, pp. 479-487, 2006.

6. Min, S., Inasaki, I., Fujimura, S., Wakabayashi, T., Suda, S., “Investigation of Adsorption Behaviour of Lubricants in Near-Dry Machining,” Proceeding of the Institution of mechanical Engineers, Part B: Journal of Engineering Manufacture, Vol. 219, No. 9, pp. 665-671, 2005.

5. Min, S., Inasaki, I., Fujimura, S., Wada, T., Suda, S., Wakabayashi, T., “A Study on Tribology in Minimal Quantity Lubrication Cutting,” Annals of the CIRP, Vol. 54, No. 1, pp. 105-108, 2005.

4. Min, S., Dornfeld, D. A., Nakao, Y., “Influence of Exit Surface Angle on Drilling Burr Formation,” Journal of Manufacturing Science and Engineering, Transactions of the ASME, Vol. 125, No. 4, pp. 637-644, 2003.

3. Min, S., Dornfeld D. A., Kim, J., Shyu, B., “Finite Element Modeling of Burr Formation in Metal Cutting,” Int. Journal of Machining Science and Technology, Vol. 5, No. 3, pp. 307-322, 2001.

2. Min, S., Kim, J., Dornfeld, D. A., “Development of a Drilling Burr Control Chart for Low Alloy Steel, AISI 4118,” Journal of Materials Processing Technology, Vol. 113, No. 1-3, pp. 4-9, 2001.

1. Kim, J., Min, S., Dornfeld, D. A., “Optimization and Control of Drilling Burr Formation of AISI 304L and AISI 4118 Based on Drilling Burr Control Charts,” International Journal of Machine Tools & Manufacture, Vol. 41, No. 7, pp. 923-936, 2001.


Conference Papers
28 Philipp Maas, Yuta Mizumoto, Yasuhiro Kakinuma, and Sangkee Min, “Anisotropic deformation behaviour of single-crystal sapphire in an orthogonal cutting process,” The 9th MIRAI Conference on Microfabrication and Green Technology, The 5th International Conference on Nanomanufacturing, The University of Macau at Taipa, Macau, China, August 15-17, 2016.

27. Philipp Maas, Yuta Mizumoto, Yasuhiro Kakinuma, and Sangkee Min, “Machinability Study of Single-Crystal Sapphire in a Ball-end Milling Process,” International Symposium on Green Manufacturing and Applications (ISGMA), Bali Nusa Dua Convention Center, Bali, Indonesia, June 21-25, 2016.

26. Marcus Jackson, Arik Van Asten, Justin Morrow, Sangkee Min and Frank Pfefferkorn,”A Comparison of Energy Consumption in Wire-Based and Powder-Based Additive-Subtractive Manufacturing,” The 44th SME North American Manufacturing Research Conference (NAMRC), Virginia Tech and Skelton Conference Center, Blacksburg, Virginia, USA, June 27-July 1, 2016.

25. Eun-Seob Kim, Hae-Sung Yoon, Jang-Yeob Lee, Min-Soo Kim, Yong-Jun Shin, Sung-Hoon Ahn, Sangkee Min, “Acceleration and Deceleration Characteristics of Power Consumption on Machine Tool Feed Drive,” The 8th International Conference on Leading Edge Manufacturing in 21st Century, Kyoto Research Park, Kyoto, Japan, October 18-22, 2015.

24. Nagakari, S., Kakinuma, Y., Min, S., “超精密加工機のためのセンサレス工具接触検知技術と 工作物認証手法の提案 (Sensor-less Tool Contact Detection for High-Precision Machine Tools and Proposal for Identifying Workpiece),” 2015 年度精密工学会秋季大会学術講演会講演論文集 (2015 JSPE Autumn Meeting), C47, pp.199-200, Tohoku University, Sendai, Miyagi, Japan, September 4-6, 2015.

23. Kim, C.J., Kim, J., Min, S., Mori, M., “Design and Uncertainty Analysis of a 5-axis Ultra-Precision Machine Tool,” Proceedings of 4th CIRP HPC, Gifu, Japan, Vol. 1, pp. 91-94, October 2010.

22. Inada, A., Min, S., Ohmori, H., “Micro Cutting of Ferrous Materials Using Diamond Tool with Carbon Particle Additive and Ionized Coolant,” Proceedings of 4th CIRP HPC, Gifu, Japan, Vol. 1, pp. 99-104, October 2010.

21. Inada, A., Ohmori, H., Min, S., Dornfeld, D., “Effects of Elid-Electrolytic Coolant with Nanometer Size Carbon Particles on the Cutting Phenomena,” Proceeding of the 2nd International Conference -Innovative Cutting Processes & Smart Machining, Cluny, France, October, 2008.

20. Inada, A., Min, S., Dornfeld, D., Ohmori, H., “Effects of Ion-Shot Coolant System on Cutting of the Ferrous material with a Diamond Tool,” Proceedings of International Multi-Conference on Engineering and Technological Innovation, Orlando, Florida, U.S.A., Vol. II, pp. 13-17, June, 2008.

19. Lee, D.E., Min, S., Sangermann, H., Dornfeld D., “Crystallographic Orientation Effect on Burr Formation in Micromilling of OFHC Copper,” Proceedings of the 3rd CIRP International Conference on High Performance Cutting, Dublin, Ireland, pp. 49-58, June, 2008.

18. Childs, T.H.C., Dornfeld, D., Min, S., “The Influence of Cutting Edge Sharpness on Surface Finish in Facing with Round Nosed Cutting Tools,” Proceedings of the 3rd CIRP International Conference on High Performance Cutting, Dublin, Ireland, pp. 265-274, June, 2008.

17. Mertens, C., Min, S., Dornfeld, D., “The Influence of Spindle Speed on the Micromachining Process,” Proceedings of The 2nd MIRAI Joint Workshop on Micro Fabrication, Kaoshiung, Taiwan, pp. 35-39, May, 2008.

16. Lee, D.E., Min, S., Dornfeld, D., “Crystallographic Orientation Effect on Burr Fromation in Micromilling of OFHC Copper,” Proceedings of The 2nd MIRAI Joint Workshop on Micro Fabrication, Kaoshiung, Taiwan, pp. 47-51, May, 2008.

15. Dornfeld, D., Min, S., Klocke, F., Sangermann, H., “Surface Generation of Vertical Side Walls in Micro-Milling,” Proceedings of The 1st MIRAI Joint Workshop on Micro Fabrication, Berkeley, CA, June, 2007.

14. Hartnett, J., Min, S., Dornfeld, D., “Micromachining and Burr Formation for Precision Mechanical Components,” Proceedings of The 1st MIRAI Joint Workshop on Micro Fabrication, Berkeley, CA, June, 2007.

13. Litwinski, K.M., Min, S., Lee, D., Dornfeld, D.A., Lee, N., “Scalability of Tool Path Planning to Micromachining,” Proceeding of the 1st International Conference on Micromanufacturing – ICOMM 2006, Urbana-Champaign, IL, USA, pp. 174-179, September, 2006.

12. Hartnett, J., Kim, S., Min, S., Dornfeld, D.A., Lee, N., Lee, H., “Influence of Process Parameters on Accuracy of Microfeatures by Micromachining,” Proceedings of the 2nd International Workshop on Microfactory Technology, Jeju, Korea, pp. 49-52, July 2006.

11. Wakabayashi, T., Suda, S., Fujimura, S., Inasaki, I., Min, S., “Tribological Behavior and Cutting Performance of Lubricants in MQL Machining,” Proceeding of CIRP 2nd International High Performance Cutting, Vancouver, Canada, June, 2006.

10. Lee, D. E., Deichmueller, M., Min, S., Dornfeld, D. A., “Variation in Machinability of Single Crystal Materials in Micromechanical Machining,” Nanoengineering Symposium 2005, Daejeon, Korea, 2005.

9. Min, S., Lee, D. E., Dornfeld, D. A., Lee, N. K., “Surface and Edge Quality Variation in Micro-machining of OFHC copper,” The 1st International Workshop on Next Generation Micro-factory System Technology, Jeju, Korea, 2005.

8. Fujimura, S., Inasaki, I., Min, S., Wakabayashi, T., Suda, S., “Investigation of Tribological Mechanism of Near Dry Machining (NDM),” Proceedings of the World Tribology Congress III, Washington DC, USA, pp. 927-928, 2005.

7. Min, S., Lee, D. E., de Grave, A., de Oliveira Valente, C. M., Lin, J., Dornfeld, D. A., “Surface and Edge Quality Variation in Precision Machining of Single Crystal and Polycrystalline Materials,” 7th International Conference on Deburring and Surface Finishing, Berkeley, CA, USA, pp. 341-350, June, 2004.

6. Choi, J., Min, S., Dornfeld, D. A., “Finite Element Modeling of Burr Formation in Drilling of a Multi-Layered Material,” 7th International Conference on Deburring and Surface Finishing, Berkeley, CA, USA, pp. 103-108, June, 2004.

5. Choi, J., Min, S., Dornfeld, D. A., Alam, M., Tzong, T., “Modeling of Inter-layer Gap Formation in Drilling of a Multi-layered Material,” 6th CIRP International Workshop on Modeling of Machining Operations, Hamilton, Ontario, Canada, pp. 113-118, May, 2003.

4. Min, S., Dornfeld, D. A., “Application of Four Levels of Drilling Burr Minimization Strategies,” 2nd Asia-Pacific Forum on Precision Surface Finishing and Deburring Technology, Seoul, Korea, pp. 95-104, July 2002.

3. Min, S., Kim, J., Dornfeld, D. A., “Thrust Force Analysis of Drilling Burr Formation Using Finite Element Method,” The 10th International Conference Precision Engineering, Yokohama, Japan, pp. 169-173, July 2001.

2. Dornfeld, D. A., Min, S., Kim, J., Hewson, J., Chu, C. H., Tyler, P., Ffield, P., Askari, A., “Burr Prevention and Minimization for the Aerospace Industry,” Aerospace Manufacturing Technology Conference Exposition, Bellevue, Washington, USA, June 1999.

1. Min, O., Kim, Y., Min, S., “Polynomial Convergent F.E.Eigen Analysis of Mindlin Plate,” Asia-Pacific Vibration Conference ’93, Kitakyushu, Japan, November 1993.