Conference Papers

  1. Detection of Process Variation in a Cold Forging Process through Smart Manufacturing
    Vignesh Selvaraj, Andrew Glaeser, Kangsan Lee, Namjeong Lee, Yunseob Hwang, Sooyoung Lee, Seungchul Lee, and Sangkee Min, Vignesh Selvaraj, Andrew Glaeser, Kangsan Lee, Namjeong Lee, Yunseob Hwang, Sooyoung Lee, Seungchul Lee, and Sangkee Min, “Detection of Process Variation in a Cold Forging Process through Smart Manufacturing,” International Symposium on Precision Engineering and Sustainable Manufacturing (PRESM), Online symposium, Korea, November 15 – 18, 2020. (https://oasis.postech.ac.kr/handle/2014.oak/104435)
  2. Remote Machine Mode Detection in Cold Forging using Vibration Signal
    Andrew Glaeser, Vignesh Selvaraj, Kangsan Lee, Namjeong Lee, Yunseob Hwang, Sooyoung Lee, Seungchul Lee, and Sangkee Min, 48th SME North American Manufacturing Research Conference (Procedia Manufacturing, Vol. 48, pp. 908 – 914, 2020) (https://doi.org/10.1016/j.promfg.2020.05.129)
  3. Dry Ultra-Precision Machining of Tungsten Carbide with Patterned nano PCD Tool
    Sangjin Maeng and Sangkee Min, 48th SME North American Manufacturing Research Conference (Procedia Manufacturing, Vo. 48, pp. 452 – 456, 2020) (https://doi.org/10.1016/j.promfg.2020.05.068)
  4. Design and Development of PCD tool for Micro Grinding of Tungsten Carbide
    Sangjin Maeng, Pyeong An Lee, Bo Hyun Kim, and Sangkee Min, International Symposium on Precision Engineering and Sustainable Manufacturing (PRESM), The Nalod Da Nang Hotel, Da Nang, Vietnam, July 10 – 13, 2019. ()
  5. Crack Removal Behavior in Ultra-Precision Machining of Sapphire
    Aditya Nagaraj, Suk Buk Kwon, Hae-Sung Yoon, and Sangkee Min, 47th SME North American Manufacturing Research Conference, NAMRC 47, Penn State, Erie, Pennsylvania, June 10-14, 2019. (Procedia Manufacturing, Vol. 34, pp. 393-398, 2019) (https://doi.org/10.1016/j.promfg.2019.06.183)
  6. Investigation of Ductile-Brittle Transition in Machining of Yttrium-Stabilized Zirconia (YSZ)
    Hae-Sung Yoon, Seola Lee, and Sangkee Min, Procedia Manufacturing, Vol. 26, pp. 446-453, SME NAMRC 46, Texas A&M University, College Station, Texas, June 18 – 22, 2018. (https://doi.org/10.1016/j.promfg.2018.07.052)
  7. Modeling of an Energy-Flexible Production Control with SysML
    Eric Unterberger, Urs Hofmann, Sangkee Min, Johannes Glasschröder, Gunther Reinharta, Procedia CIRP, Vol. 72, pp. 432-437, 51st CIRP Conference on Manufacturing Systems, Stockholm Waterfront Congress Centre, Stockholm, Sweden, May 16-18, 2018. (https://doi.org/10.1016/j.procir.2018.03.111)
  8. Basic Study on Ultra-Precision Cutting of Single-Crystal Sapphire (単結晶サファイアの超精密切削における基礎的研 究)
    Yuta Mizumoto, Philipp Maas, Yasuhiro Kakinuma, and Sangkee Min, 2016 JSPE Autumn Meeting (2016 年度精密工学会秋季大会学術講演会講演論文集), Ibaraki University, Ibaraki, Japan, September 6-8, 2016 (https://doi.org/10.11522/pscjspe.2016A.0_11)
  9. Anisotropic deformation behaviour of single-crystal sapphire in an orthogonal cutting process
    Yuta Mizumoto, Philipp Maas, Yasuhiro Kakinuma, and Sangkee Min, The 9th MIRAI Conference on Microfabrication and Green Technology, The 5th International Conference on Nanomanufacturing, The University of Macau at Taipa, Macau, China, August 15-17, 2016. ()
  10. Mechanical Characteristic Identification of Workpiece by Applying Sensor-less Micro-Tool Contact Detection with Ultra-Precision Machine
    Satoko Nagakari, Yasuhiro Kakinuma, and Sangkee Min, The 16th International Conference on Precision Engineering, ACT CITY Hamamatsu, Hamamatsu, Japan, November 14-16, 2016. ()
  11. Machinability Study of Single-Crystal Sapphire in a Ball-end Milling Process
    Philipp Maas, Yuta Mizumoto, Yasuhiro Kakinuma, and Sangkee Min, International Symposium on Green Manufacturing and Applications (ISGMA), Bali Nusa Dua Convention Center, Bali, Indonesia, June 21-25, 2016. ()
  12. A Comparison of Energy Consumption in Wire-Based and Powder-Based Additive-Subtractive Manufacturing
    Marcus Jackson, Arik Van Asten, Justin Morrow, Sangkee Min and Frank Pfefferkorn, The 44th SME North American Manufacturing Research Conference (NAMRC), Virginia Tech and Skelton Conference Center, Blacksburg, Virginia, USA, June 27-July 1, Procedia Manufacturing, Vol. 5, pp. 989-1005, 2016. (https://doi.org/10.1016/j.promfg.2016.08.087)
  13. Acceleration and Deceleration Characteristics of Power Consumption on Machine Tool Feed Drive
    Eun-Seob Kim, Hae-Sung Yoon, Jang-Yeob Lee, Min-Soo Kim, Yong-Jun Shin, Sung-Hoon Ahn, and Sangkee Min, The 8th International Conference on Leading Edge Manufacturing in 21st Century, Kyoto Research Park, Kyoto, Japan, October 18-22, 2015. (https:// doi.org/10.1299/jsmelem.2015.8._0214-1_)
  14. Sensor-less Tool Contact Detection for High-Precision Machine Tools and Proposal for Identifying Workpiece (超精密加 工機のためのセンサレス工具接 触検知技術と工作物認証手法の提案)
    Satoko Nagakari, Yasuhiro Kakinuma, Sangkee Min, 2015 JSPE Autumn Meeting (2015 年度精密工学会秋季大会学術講演会講演論文集), C47, pp.199-200, Tohoku University, Sendai, Miyagi, Japan, September 4-6, 2015. (https://doi.org/10.11522/pscjspe.2015A.0_199)
  15. Sensor-less Tool Contact Detection on Linear Motor Driving XY Stage (リニアモータ駆動XYステージにおけるセンサレス工具接触検知技術)
    Yoshitaka Murakami, Yasuhiro Kakinuma, and Sangkee Min, 日本機械学会 2014 年度年次大会講演論文集, No. 14-1, Tokyo, Japan, September 7-10, 2014. (https://doi.org/10.1299/jsmemecj.2014._S1310205-)
  16. Design and Uncertainty Analysis of a 5-axis Ultra-Precision Machine Tool
    Chang-Ju Kim, Jongsoo Kim, Sangkee Min, and Masahiko Mori, Proceedings of 4th CIRP HPC, Gifu, Japan, Vol. 1, pp. 91-94, October 24-26, 2010. ()
  17. Micro Cutting of Ferrous Materials Using Diamond Tool with Carbon Particle Additive and Ionized Coolant
    Akihiro Inada, Sangkee Min, and Hitoshi Ohmori, Proceedings of 4th CIRP HPC, Gifu, Japan, Vol. 1, pp. 99-104, October 24-26, 2010. ()
  18. Investigation of the Effects of an Electrolytic Coolant with a Nano Carbon Additive in Diamond Micro Cutting on Ferrous Materials
    Akihiro Inada, Hitoshi Ohmori, Sangkee Min, David Dornfeld, Proceedings of the 5th International Conference on Leading Edge Manufacturing in 21st Century (LEM21), Osaka University, Osaka, Japan, pp. 385-390, December 2-4, 2009. (https://doi.org/10.1299/jsmelem.2009.5.385)
  19. Effects of Elid-Electrolytic Coolant with Nanometer Size Carbon Particles on the Cutting Phenomena
    Akihiro Inada, Hitoshi Ohmori, Sangkee Min, and David Dornfeld, Proceeding of the 2nd International Conference -Innovative Cutting Processes & Smart Machining, Cluny, France, October 22-23, 2008. ()
  20. Effects of Ion-Shot Coolant System on Cutting of the Ferrous material with a Diamond Tool
    Akihiro Inada, Sangkee Min, David Dornfeld, and Hitoshi Ohmori, Proceedings of International Multi-Conference on Engineering and Technological Innovation, Orlando, Florida, U.S.A., Vol. II, pp. 13-17, June 29-July 2, 2008. ()
  21. Crystallographic Orientation Effect on Burr Formation in Micromilling of OFHC Copper
    Daeeun Lee., Sangkee Min, Hubertus Sangermann, and David Dornfeld, Proceedings of the 3rd CIRP International Conference on High Performance Cutting, UCD, Dublin, Ireland, pp. 49-58, June 12-13, 2008. ()
  22. The Influence of Cutting Edge Sharpness on Surface Finish in Facing with Round Nosed Cutting Tools
    Tom H.C. Childs, David Dornfeld, Daeeun Lee, Sangkee Min, Katsuhiko Sekiya, Ryo Tezuka, and Yasuo Yamane, Proceedings of the 3rd CIRP International Conference on High Performance Cutting, UCD, Dublin, Ireland, pp. 265-274, June 12-13, 2008. (https://escholarship.org/content/qt1sp832mw/qt1sp832mw.pdf)
  23. The Influence of Spindle Speed on the Micromachining Process
    Christian Mertens, Sangkee Min, and David Dornfeld, Proceedings of the 2nd MIRAI Joint Workshop on Micro Fabrication, 8th Japan-Korea-US Joint Symposium on Micro Fabrication, MIRDC, Kaoshiung, Taiwan, pp. 35-39, April 29-May 1, 2008. ()
  24. Crystallographic Orientation Effect on Burr Formation in Micromilling of OFHC Copper
    Daeeun Lee, Sangkee Min, and David Dornfeld, Proceedings of the 2nd MIRAI Joint Workshop on Micro Fabrication, 8th Japan-Korea-US Joint Symposium on Micro Fabrication, MIRDC, Kaoshiung, Taiwan, pp. 47-51, April 29-May 1, 2008. ()
  25. Surface Generation of Vertical Side Walls in Micro-Milling
    David Dornfeld, Sangkee Min, Fritz Klocke, and Hubertus Sangermann, Proceedings of the 1st MIRAI Joint Workshop on Micro Fabrication, 7th Japan-Korea-US Joint Symposium on Micro Fabrication, UC Berkeley, CA, June 28-29, 2007. ()
  26. Micromachining and Burr Formation for Precision Mechanical Components
    Jeffrey Hartnett, Sangkee Min, and David Dornfeld, Proceedings of the 1st MIRAI Joint Workshop on Micro Fabrication, 7th Japan-Korea-US Joint Symposium on Micro Fabrication, UC Berkeley, CA, June 28-29, 2007. ()
  27. Scalability of Tool Path Planning to Micromachining
    Kai M. Litwinski, Sangkee Min, Daeeun Lee, David A. Dornfeld, and Nakkyu Lee, Proceeding of the 1st International Conference on Micromanufacturing – ICOMM 2006, UIUC, Urbana-Champaign, IL, USA, pp. 174-179, September 13-15, 2006. ()
  28. Influence of Process Parameters on Accuracy of Microfeatures by Micromachining
    Jeffrey Hartnett, Sungryul Kim, Sangkee Min, David A. Dornfeld, Nakkyu Lee, and Hyejin Lee, The 2nd International Workshop on Next Generation Micro-Factory System Technology, Seogwipo KAL Hotel, Jeju, Korea, pp. 49-52, July 6-7, 2006. ()
  29. Tribological Behavior and Cutting Performance of Lubricants in MQL Machining
    Toshiaki Wakabayashi, Satoshi Suda, Satoshi Fujimura, Ichiro Inasaki, and Sangkee Min, Proceeding of CIRP 2nd International High Performance Cutting, Vancouver, Canada, June 12-13, 2006. ()
  30. Variation in Machinability of Single Crystal Materials in Micromechanical Machining
    Daeeun Lee, Manuel Deichmueller, Sangkee Min, and David A. Dornfeld, Nanoengineering Symposium 2005, KIMM, Daejeon, Korea, October 27-28, 2005. ()
  31. Surface and Edge Quality Variation in Micro-machining of OFHC copper
    Sangkee Min, Daeeun Lee, David A. Dornfeld A., and Nakkyu Lee, The 1st International Workshop on Next Generation Micro-Factory System Technology, Seogwipo KAL Hotel, Jeju, Korea, July 15-16, 2005. ()
  32. Investigation of Tribological Mechanism of Near Dry Machining (NDM)
    Satoshi Fujimura, Ichiro Inasaki, Sangkee Min, Toshiaki Wakabayashi, and Satoshi Suda, Proceedings of the World Tribology Congress III, Washington DC, USA, pp. 927-928, September 12-16, 2005. ()
  33. Surface and Edge Quality Variation in Precision Machining of Single Crystal and Polycrystalline Materials
    Sangkee Min, Daeeun Lee, Arnaud de Grave, Carlos M. de Oliveira Valente, J. Lin, and David A. Dornfeld, 7th International Conference on Deburring and Surface Finishing, Berkeley, CA, USA, pp. 341-350, June, 2004. ()
  34. Finite Element Modeling of Burr Formation in Drilling of a Multi-Layered Material
    Jihong Choi, Sangkee Min, and David A. Dornfeld, 7th International Conference on Deburring and Surface Finishing, Berkeley, CA, USA, pp. 103-108, June, 2004. ()
  35. Modeling of Inter-layer Gap Formation in Drilling of a Multi-layered Material
    Jihong Choi, Sangkee Min, David A. Dornfeld A., Mahboob Alam, and Tsair-Jyh Tzong, 6th CIRP International Workshop on Modeling of Machining Operations, McMaster University, Hamilton, Ontario, Canada, pp. 113-118, May 19-20, 2003. ()
  36. Application of Four Levels of Drilling Burr Minimization Strategies
    Sangkee Min and David A. Dornfeld, 2nd Asia-Pacific Forum on Precision Surface Finishing and Deburring Technology, Konkuk University, Seoul, Korea, pp. 95-104, July 22-24, 2002. ()
  37. Finite Element Modeling of Burr Formation in Metal Cutting
    Sangkee Min, David Dornfeld, Jinsoo Kim, and Borlin Shyu, Proceedings of the 4th CIRP International Workshop on Modeling of Machining Operations, TU Delft, Delft, the Netherlands, pp. 97-104, August 17-18, 2001. ()
  38. Thrust Force Analysis of Drilling Burr Formation Using Finite Element Method
    Sangkee Min, Jinsoo Kim, and David A. Dornfeld, The 10th International Conference Precision Engineering, Yokohama, Japan, pp. 169-173, July 2001. (https://doi.org/10.1007/0-306-47000-4_32)
  39. Development of a Drilling Burr Control Chart for Low Alloy Steel, AISI 4118
    Sangkee Min, Jinsoo Kim, and David A. Dornfeld, 5th Asia Pacific Conference on Materials Processing, TEMF Hotel, Seoul, Korea, Vol. 113, No. 1-3, pp. 4-9, June 25-27, 2001. (https://doi.org/10.1016/S0924-0136(01)00589-1)
  40. Burr Prevention and Minimization for the Aerospace Industry
    David A. Dornfeld, Sangkee Min, Jinsoo Kim, John Hewson, Chih-Hsing Chu, Phillip Tyler, Paul Ffield, and Abe Askari, Aerospace Manufacturing Technology Conference & Exposition, Bellevue, Washington, USA, June 5, 1999. (SAE Technical Paper 1999-01-2292, 1999.) (https://doi.org/10.4271/1999-01-2292)
  41. Polynomial Convergent F. E. Eigen Analysis of Mindlin Circular Plate
    Yongwoo Kim, Sangkee Min, and Oak-Key Min, Proceedings of Asia-Pacific Vibration Conference ’93, Vol. 4, pp. 1476-1481, Vol. 4, pp. 1476-1481, Kitakyushu, Japan, November 14-18, 1993. ()